RADIO FREQUENCY IDENTIFICATION EQUIPMENT AND SYSTEMS

READ / WRITE modules

Long range reader/encoder for contactless reading and encoding of I-CODE smart labels and cards. It has applications in many different areas, when it is neccesary to identify goods, materials orpeople without physical or visual contact. Its long reading/encoding range, and its anti-collision feature, makes it possible to simultaneously treat a very big number of labels, reading or encoding one, several or every label in the working field. (PDF 111kB)

Antennas

3D Long Range Antenna Long Range Antennas for Radio Frequency Identification applications, operating at 13.56MHz with the uniqie feature of automatic self tuning capabilities. The antennas incorporates a TX antenna and a RX antenna in the same module.
It allows the configuration of door (one TX/RX antenna) or gate (two antennas, both TX/RX) systems. (PDF 117kB)

3D Medium Range Antenna 60x60 Long Range, small size antenna for Radio Frequency Identification applications operating at 13.56MHz. The ANTLR5000 incorporates a TX antenna and a RX antenna in the same module, with a box for electronics in the base of the unit. Its small size (60x60 cm) makes it ideal for most industrial applications, where it is easy to integrate in conveyor belts, working tables. (PDF 103kB)

2D Medium range loop antenna Medium Range Antenna for Radio Frequency Identification applications, in the 13.56MHz operating frequency for applications up to 70cm operating range. The ANTMR5000 incorporates a single TX/RX antenna to be used with the RIDEL5000 long range reader/encoder in the single antenna mode. It generates a «2D» RF field, the transponder is better activated in some preferred positions. (PDF 94kB)

Automatic tuning units

TX/RX Automatic antenna tuner for door (master) or gates (slave). Automatic Antenna Tuning Unit to couple the antennas to the RFID reader/encoder. It adjust the ideal tunning point of the antenna, under RIDEL5000 control. The ANTUN5000 allows the coupling of the slave antenna in «gate» configurations, with two antennas, both TX/RX. It is also used to couple the antenna when the system requires one antena, in «door» configurations. (PDF 106kB)

TX/RX Automatic antenna tuner + I/O Control + Splitter + Combiner for gates (master). Automatic Antenna Tuning Unit to couple the antennas to the RFID reader/encoder. It adjust the ideal tunning point of the antenna, under RIDEL5000 control. It has a digital input to be contrlled from the RIDEL5000 by means of a synchronous serial protocol. If it is used with two antennas, it works as a master for the ANTUN5000 slave unit. (PDF 120kB) 

Test Equipment, Developement Kit,

RFID-Starter Kit Demonstration and starter kit for RFID devices, in I-CODE technology. It is composed of an I-CODE long range reader/encoder RIDEL5000, a medium range loop antenna ANTMR5000, a set of standard-format transponders, operating manuals, and a disk containing demo and test programs and developement DLL´s to work under WINDOWS 95 or 98. (PDF 111kB)

TagTester. Measurement and evaluation system designed to make RF tests and measures on RFID transponders without physical contact. The Kit is composed of a RFTST1000 analyzer, a TAGAN1000 antenna, and a PC software under WINDOWS 95 or 98, of virtual instrumentation type to graphically represent the measures. (PDF 165kB)

Label measurement Kit MDKIT100

Accessories

RF cable - RS232 cable and power supply cable

Set of smart labels and Transponder (PDF 45kB).

Power Supplies

Power supply 24 Vcc FALME1024 STK

Power supply 12 Vcc FALME1012 STK

Short Range

The broad productline for 13.56MHz or 125kHz device.

One Stop Shopping

General Catalog (PDF 521kB)

Copyright © 2002 EHAG & Softronica
All rights reserved